A-Series
1 & 2 Way Blow
A Series units are suitable for use in high cooling load applications or where closer temperature control is required.
Although they have a similar aesthetic appearance to traditional chilled beams, these units have the ability to utilize entering water temperature of 42°F for cooling and provide a built-in condensate management system.
AIB 1 & 2-Way Blow
- Available in 2’x2’, 2’x4’ & 2’x6’
- Provides Sensible and Latent Cooling with unit’s coil
- EWT as low as 42° for cooling and up to 180° EWT for heating
- Up to 2 tons of cooling & greater than 3.5 tons of heating
- Outside Air inlets on sides or ends of units for efficiency of duct design
- Standard code compliant 1 1/2″ deep, internally sloped drain pan with 3/4” FNPT copper connection
- Range: 15 CFM to 180 CFM of O.A. delivered to the space with a single unit
- Airflow characteristics: Up to 14 ft. throw at 100 fpm
- Coanda wings for exposed applications
- Noise levels: NC17-NC28
- Drain height as high as 6” above ceiling line for gravity draining
- ¾” Code Compliant copper FNPT drain connection
- Single point coil connections
- Unit has No wiring, no moving parts, no wear parts to replace
